Question: Why Are Singles 45 Rpm?

Does playing a record at the wrong speed damage it?

“Playing records on the wrong speed is mind-bending but will do no damage to your vinyl..

Do 12 singles sound better?

12 inch singles will usually sound much better. Since the grooves are farther apart on a 12 inch single it can be mastered at a higher volume.

Are 45 rpm records still made?

In 1987, A&M released the first cassette single and other record companies quickly followed suit. By 1990 however, record companies began discontinuing the 45, except for jukebox releases and collector’s items. However with the vinyl resurrection of the last few years, many companies are back to pressing vinyl.

Can you play a 7 on a record player?

All record players do not play every single size of vinyl record. All record players will play the two most common sizes of vinyl record, those being 12-inch and 7-inch, but it is far less likely they will be able to play a 10-inch record.

What happens if you play a 33 record at 45?

The tip mass of the stylus will probably erase the highest frequencies from the record if you play it back at 45 instead of 33. The tip mass of the stylus will probably erase the highest frequencies from the record if you play it back at 45 instead of 33.

What does 33 rpm mean?

33, 45, and 78 RPM is the speed at which the most common commercially available vinyl records spin at represented in revolutions per minute. The records themselves are often referred to by their speed.

What does LP mean?

long play recordMeaning: A long play record is a vinyl record characterized by its 33 1⁄3rpm speed,12- or 10-inch diameter, and it’s “microgroove” specification. How many songs are on an LP? Typically 7 tracks and up. Long story short, an LP is a full-length album. All that distinguishes an LP from any other album is its vinyl medium.

Why does vinyl sound so good?

Vinyl is far more high-quality. No audio data is lost when pressing a record. It sounds just as great as the producer or band intended. There’s another, far superior reason why vinyl is better than lossy digital formats.

What size is the hole in a 45 record?

1.5 inchesRather than license Columbia’s technology for their releases, RCA introduced their own new record, the 7-inch single that spun at 45 RPM and had a center hole that measured 1.5 inches in diameter.

What is the purpose of a 45 rpm adapter?

A 45 rpm adapter (also 45 rpm record insert, 45 rpm spindle adapter, or 7 inch adapter, the common size of 45 RPM records) is a small plastic or metal insert that goes in the middle of a 45-rpm record so it can be played on the standard size spindle of a turntable.

How do you tell if record is 33 or 45?

You can usually tell if a record is a 33 RPM or 45 RPM by looking at the label. A 78 will not be made of vinyl. You’re not going to run into 78s unless you seek them out, so don’t even worry about them. These objects, BTW, whether made of vinyl, shellac, or other plastics, are called records.

What’s the difference between 45 rpm and 33 rpm?

Vinyl records sound better if they are cut at higher speeds. The higher the rpm, the faster the vinyl passes under the playback stylus. This means that for each second of playback more sound information goes from the stylus to your speakers at 45rpm than 33rpm.

Why do 45s have a bigger hole?

When a new 45 dropped from the spindle onto the platter, it was required to spin up from a dead stop to 45 RPM almost instantly. The torque applied to the edges of the hole was quite severe and caused standard one-half-inch holes to quickly go out of round, resulting in a wobbly record.

Why is a 45 record called a 45?

The most common form of the vinyl single is the “45” or “7-inch”. The names are derived from its play speed, 45 rpm, and the standard diameter, 7 inches. The 7-inch 45 rpm record was released 31 March 1949 by RCA Victor as a smaller, more durable and higher-fidelity replacement for the 78 rpm shellac discs.

Why does 45 rpm sound better?

The higher rotation speed of 45 RPM allows for a wider frequency response, and the larger available surface area allows for less compression of any signals with a wide amplitude. Bass is an example of a wide amplitude signal that sounds better on 45. Overtones and high treble are also better.

Why are some 12 Inch Records 45 RPM?

12 Inch Singles Generally cut at 45 RPM, they feature wider groove spacing and shorter playing time compared to LPs, which permits a broader dynamic range or louder recording level (among other benefits – see 45 RPM notes above). Twelve-inch records are popular in dance music, where DJs use them to play in clubs.

Can 45s be played on record players?

Every turntable can play 33 and 45 RPM records. Only those classified as “three speed” support 78 RPM. These old records have wider grooves, so you may need to replace your stylus to play them. … Because record players are analog systems, you’re not guaranteed the same precision that you’d expect from a digital device.

What is the center of a record called?

Labels: The paper circle in the middle of a pressed record. Sometimes referred to as a “sticker”, a record label is actually not adhered to the face of the disc after pressing – it is an integral part of the pressing process, and serves to cool the middle of the record while it is being pressed.

Are most vinyl 33 or 45?

Vinyl records are produced to be played at one of three speeds: 33 1/3 RPM, 45 RPM, and 78 RPM. You will almost never deal with 78 RPM records, so don’t worry about that. Most full-size 12-inch records will be 33 1/3 RPM, though some — mainly EPs and maxi-singles — will be at 45 RPM.

Does vinyl really sound better?

Over the 2000s, songs were mastered with less and less dynamic range, all while getting louder and louder on average. It wasn’t long before vinyl recordings of the same content often had better sound quality at normal listening volumes simply because they had higher dynamic range.